Designed specifically for directional drilling, the Condux 819 D.Drill Swivels prevent boring equipments' rotational torque from interfering with the product (cable or conduit) being pulled. The D.Drill Swivels are grease-able and double sealed to keep contaminants out. Clevis pins with hex nuts allow for installation and removal from either side of the swivel. There is a 90 day warranty on the directional drill swivels.
CAUTION: To be used for directional drilling only.
CAUTION: Condux requires the use of a calcium based lubricant only. Other lubricants may have adverse reactions when exposed to bentonite products. Condux requires that the swivels be flushed with grease after each use to purge any contaminants that may have penetrated past the seals into the swivel while boring.
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Compression Working Load [lb]:
3300
Compression Working Load [Newton]:
14678
Diameter [in]:
2
Diameter [mm]:
51
Entire Slot Depth [in]:
1.81
Entire Slot Depth [mm]:
46
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08190020
Item Name:
2 819 Series Directional Drill Swivel 10,000 lb.
Length [in]:
7.83
Length [mm]:
199
Maximum Outside Diameter [in]:
2.89
Maximum Outside Diameter [mm]:
73
Package Type:
Each
Pin Center [in]:
.75
Pin Center [mm]:
19
Pin Diameter [in]:
.63
Pin Diameter [mm]:
16
Replacement Part:
08190114, 2 Clevis Bolt for 819 D.Drill Swivel|02250600, Lock Nut for 2 819 D.Drill Clevis Bolt
Shipping Method:
Parcel
Similar to:
Lewis HD-x-DBS, DCD 00503-204, dub, lite, dw, double clevis, 401-283, sealed thrust
Slot Width [in]:
.75
Slot Width [mm]:
19
Tension Working Load [lb]:
10000
Tension Working Load [Newton]:
44480
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
5.310000
Weight [lb]:
5.31
Width [in]:
31
