3" Break-Away Directional Drill Swivel 18,500 lb

No reviews yet Write a Review
SKU:
NTCPSJ000425
MPN:
08075600
$1,485.99
Condition:
New

Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use "weak link" pipe sections or wire when using the Condux Break-Away Swivel. Six different diameter swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. (5,338 N) to 25,000 lbs. (111,250 N) and are designed to separate at ?10% of their rated break load. Order Replacement Pins as needed.

NOTE: D.Drill Swivels come with a 90 day limited warranty.

*WARNING: These swivels are to be used while Directional Drilling only.? Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.

Break Load [lb]:
18,500
Break Load [Newton]:
82288
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Diameter [in]:
3
Diameter [mm]:
76
Entire Slot Depth [in]:
3.56
Entire Slot Depth [mm]:
90
Height [in]:
5
Length [in]:
10
Width [in]:
5
Item #:
08075600
Item Name:
3 Break-Away Directional Drill Swivel 18,500 lb
Length [in]:
12.75
Length [mm]:
324
Maximum Outside Diameter [in]:
4.50
Maximum Outside Diameter [mm]:
114
Package Type:
Each
Pin Center [in]:
1.37
Pin Center [mm]:
36
Pin Diameter [in]:
1.13
Pin Diameter [mm]:
29
Replacement Break Pin:
08029720
Replacement Part:
08190134, 3 Clevis Bolt for 819 D.Drill Swivel|02250800, Lock Nut for 3 819 D.Drill Clevis Bolt
Shipping Height [in]:
5
Shipping Length [in]:
10
Shipping Method:
Parcel
Shipping Width [in]:
5
Slot Width [in]:
1.31
Slot Width [mm]:
33
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
10.000000