The Condux Fixed Head Innerduct Pulling Eye features tapered buttress threads thread into the innerduct for maximum pulling strength.
- These eyes connect directly to a Condux swivel.
- When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innderduct manufacturers.
Compatible with:
08581225, 1/4 Threaded Chain Connector|TDE10N, 3/8 Quick Link|08581237, 3/8" Threaded Chain Connector|TDE9N, 5/16" Quick Link|08581231, 5/16" Threaded Chain Connector"
Compatible Swivel:
08080912, 1-1/4 5000 lb. Champion Pulling Swivel|08210014, 1-7/16 7500 lb. 821 Champion Swivel"
Duct Range Inside Diameter [in]:
1.88 - 2.07
Duct Range Inside Diameter [mm]:
48 - 53
Height [in]:
10
Length [in]:
10
Width [in]:
10
Hole Location [in]:
0.75
Hole Location [mm]:
19
Hole Size [in]:
0.81
Hole Size [mm]:
21
Item #:
08914160, 08914160
Item Name:
2 Fixed Head Innerduct Pulling Eye
Maximum Outside Diameter [in]:
2.5
Maximum Outside Diameter [mm]:
62
Nominal Size [in]:
2
Nominal Size [mm]:
51
Obsolete Part Number:
8913412
Package Type:
Each
Rear Lug Diameter [in]:
0.38
Rear Lug Diameter [mm]:
10
Shipping Height [in]:
2
Shipping Length [in]:
6
Shipping Method:
Parcel
Shipping Width [in]:
2
Similar to:
DCD 00604-200|DP-200L
Thickness of Eye [in]:
0.5
Thickness of Eye [mm]:
13
Units Per Package:
1
Weight [lb]:
3.500000
