The Condux Fixed Head Innerduct Pulling Eye features tapered buttress threads thread into the innerduct for maximum pulling strength.
- These eyes connect directly to a Condux swivel.
- When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innderduct manufacturers.
Compatible with:
TDE10N, 3/8 Quick Link|08581237, 3/8 Threaded Chain Connector|TDE9N, 5/16 Quick Link|08581231, 5/16" Threaded Chain Connector
Compatible Swivel:
08080913, 1-3/8 7000 lb. Champion Pulling Swivel|08210014, 1-7/16 7500 lb. 821 Champion Swivel
Duct Range Inside Diameter [in]:
1.68-1.81
Duct Range Inside Diameter [mm]:
43-46
Height [in]:
10
Length [in]:
10
Width [in]:
10
Hole Location [in]:
0.75
Hole Location [mm]:
19
Hole Size [in]:
0.66
Hole Size [mm]:
17
Item #:
08914150
Item Name:
1 3/4 Fixed Head Innerduct Pulling Eye
Maximum Outside Diameter [in]:
2.25
Maximum Outside Diameter [mm]:
57
Nominal Size [in]:
1.75
Nominal Size [mm]:
44
Obsolete Part Number:
08913322
Package Type:
Each
Rear Lug Diameter [in]:
0.38
Rear Lug Diameter [mm]:
10
Shipping Method:
Parcel
Similar to:
DCD 00604-175|DP-175L
Thickness of Eye [in]:
0.5
Thickness of Eye [mm]:
13
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
3.250000
