No-Wrench Screw Anchors may be installed by hand or machine. The forged Triple Eye on the rod has a large opening to admit a turning bar for screwing the anchor down. The eye will also fit into an adapter available from most hole-boring machine manufacturers so the anchor may be power-installed. The entire anchor is hot-dip galvanized for long resistance to rust. Hot Dip Galvanized per ASTM A123.
No-Wrench Screw Anchors can be installed to a greater depth to reach a firmer soil by using an extension rod.
Note: If hand installed, holding capacity may be reduced by as much as 10% to 20%. Capacity ratings apply to properly installed anchors only. Failure to install within 5 degrees of alignment with the guy load will significantly lower strength.
ASTM Specification:
A123
Coating:
Hot Dip Galvanized
Diameter [in]:
0.75
Freight Class:
50
Height [in]:
10
Length [in]:
70
Width [in]:
10
Guy Attachments:
3
Helix Diameter [in]:
6
Helix Diameter [mm]:
152
Holding Strength Class 5 [lb]:
6500
Holding Strength Class 6 [lb]:
5000
Holding Strength Class 7 [lb]:
2500
Item #:
BOLTANCH6X66
Item Name:
6 inch Helix, 3/4 x 66 inch Shaft
Length [in]:
66
Length [mm]:
1676
Package Type:
Each
Pallet Quantity:
100
Rod Diameter [in]:
0.75
Rod Diameter [mm]:
19
Shipping Height [in]:
10
Shipping Length [in]:
70
Shipping Method:
Parcel
Shipping Width [in]:
10
Similar to:
Hubbell Chance 63461, Allied Bolt 1166, J6526WCA
Torque Load Limit [lb]:
400
Type of Handling Units:
PLT
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
12.000000
Weight [kg]:
5
Weight [lb]:
11
