5/16" Helical Deadend

Helical Dead-ends, installed at the top, the breaker and the anchor, provide today's most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high stress holding devices.

Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.

Nomenclature:

• Cross-over Marks: (A) Indicates the starting point for application on smaller diameter fittings. (B) Indicates alternate starting point for application on larger diameter fittings.
• Cabled Loop: Furnished as standard, all sizes.
• Pitch Length: One complete wrap.
• Short Leg-Long Leg: Identifies rods belonging to each leg, after application.
• Color Code and Length: Assists in identification of strand size, corresponding to tabular information appearing on price page.
• Identification Tape: Shows catalog number, nominal sizes.