Helical Dead-ends, installed at the top, the breaker and the anchor, provide today's most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high stress holding devices.
Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.
Nomenclature:
- Cross-over Marks: (A) Indicates the starting point for application on smaller diameter fittings. (B) Indicates alternate starting point for application on larger diameter fittings.
- Cabled Loop: Furnished as standard, all sizes.
- Pitch Length: One complete wrap.
- Short Leg-Long Leg: Identifies rods belonging to each leg, after application.
- Color Code and Length: Assists in identification of strand size, corresponding to tabular information appearing on price page.
- Identification Tape: Shows catalog number, nominal sizes.
Coating:
B-Coat
Color:
Orange
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
BOLTDEADEND3/8
Item Name:
Deadend 3/8 inch
Length [in]:
35
Length [mm]:
788
Package Type:
Each
Shipping Method:
Parcel
Size [in]:
3/8
Unit of Measure:
EA.
Units Per Package:
50
Weight [lb]:
1.020000
Weight [lb]:
1
