For Optimal Fiber Blowing Conditions
Save time and money by preparing the duct before initiating your fiber blowing job.
Cleaning the duct prior to blowing the fiber create a smoother fiber blow. It also secures the fiber, as dirt or stones that find its way into the duct during installation gets removed during cleaning. This can minimize costly errors.
The sponges can both be used for cleaning and for lubricating the duct.
Why Fremco sponges?
- The cylinder shape makes them more stable in the duct as they do not roll around
- Due to the density of the material, they absorb the right amount of lubrication and do not crumble away
- The different selection of sizes ensures you can clean and lubricate the whole duct
- Due to its white colour, it is much easier to see when the sponge is dirty and used up
Reference:
For NANOFLOW, NANOFLOW MX, MICROFLOW TOUCH, AND MICROFLOW LOG:
| Sponges diameter | Inner duct dimension | Item No. | Pack size Qty | |
| 5 mm | 2.5 - 4.0mm ID | 103-2005060 | 100 | |
| 8 mm | 4.0 - 6.0mm ID | 103-2008060 | 100 | |
| 12 mm | 6.0 - 9.0mm ID | 103-2012060 | 100 | |
For MINIFLOW RAPID:
| Sponges diameter | Inner duct dimension | Item No. | Pack size Qty | |
| 5 mm | 4.0 - 6.0mm ID | 103-2008060 | 100 | |
| 8 mm | 6.0 - 9.0mm ID | 103-2012060 | 100 | |
| 12 mm | 9.0 - 14.0mm ID | 103-2018060 | 50 | |
| 28 mm | 14.0 - 21.0mm ID | 103-202860 | 20 | |
For POWERFLOW RAPID, MULTIFLOW RAPID:
| Sponges diameter | Inner duct dimension | Item No. | Pack size Qty | |
| 12 mm | 6.0 - 9.0mm ID | 103-2012060 | 100 | |
| 18 mm | 9.0 - 14.0mm ID | 103-2018060 | 50 | |
| 28 mm | 14.0 - 21.0mm ID | 103-2028060 | 20 | |
| 45 mm | 21.0 - 35.0mm ID | 103-2045060 | 10 | |
| 50 mm | 25.0 - 45.0mm ID | 103-2050060 | 10 | |
| 60 mm | 30.0 - 50.0mm ID | 103-2060060 | 10 | |
