?Break-Away Swivels for Directional Drilling
Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use ?weak link" pipe sections or wire when using the Condux Break-Away Swivel. Six different diameter swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. (5,338 N) to 25,000 lbs. (111,250 N) and are designed to separate at ?10% of their rated break load. Order Replacement Pins as needed.
NOTE: D.Drill Swivels come with a 90 day limited warranty.
*WARNING: These swivels to be used while Directional Drilling only?Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.
Break Load [lb]:
3,400
Break Load [Newton]:
15123
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Diameter [in]:
1.25
Diameter [mm]:
32
Entire Slot Depth [in]:
1.34
Entire Slot Depth [mm]:
34
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08021260
Item Name:
1-1/4 Break-Away D.Drill Swivel 3400 lb
Length [in]:
5.44
Length [mm]:
138
Obsolete Part Number:
CDX08076100
Package Type:
Each
Pin Center [in]:
.59
Pin Center [mm]:
15
Pin Diameter [in]:
.37
Pin Diameter [mm]:
9
Replacement Break Pin:
08021265
Replacement Part:
08081042, 1-1/4 Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Shipping Method:
Parcel
Slot Width [in]:
.56
Slot Width [mm]:
14
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
2.000000
