Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use "weak link" pipe sections or wire when using the Condux Break-Away Swivel.
This swivel is available to accommodate various pulling needs.? Break loads range from 1,200 lbs. (5,338 N) - 25,000 lbs (111,250 N) and are designed to separate at ?10% of their rated break load.? Order replacement pins as needed.
Note: D. Drill Swivels come with a 90 day limited warranty.
*WARNING: This swivel is to be used while Directional Drilling only. Severe personal injury could result if used with rope or with steel winch lines in cable pulling operations.
Break Load [lb]:
2,500
Break Load [Newton]:
11120
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Diameter [in]:
1.25
Diameter [mm]:
32
Entire Slot Depth [in]:
1.34
Entire Slot Depth [mm]:
34
Freight Class:
50
Height [in]:
10
Length [in]:
10
Packaging Type:
Boxes
Width [in]:
10
Item #:
08019600
Item Name:
1-1/4 Break-Away D.Drill Swivel 2500 lb
Length [in]:
5.44
Length [mm]:
138
Obsolete Part Number:
CDX08019600
Package Type:
Each
Pin Center [in]:
.59
Pin Center [mm]:
15
Pin Diameter [in]:
.37
Pin Diameter [mm]:
9
Replacement Break Pin:
08021245
Replacement Part:
08081042, 1-1/4 Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Shipping Method:
Parcel
Slot Width [in]:
.56
Slot Width [mm]:
14
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
2.000000
