Avoid overstressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between reamer and pulling eye. No need to use "weak link" pipe sections or wire when using a Condux Break-Away Swivel.
Theses swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. - 25,000 lbs. and separate at ±10% of their rated break load. Order replacement pins as needed.
NOTE: D. Drill Swivels come with a 90 day limited warranty.
WARNING: These swivels are to be used for directional drilling only. Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.
Break Load [lb]:
1,200
Break Load [Newton]:
5338
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Diameter [in]:
1.25
Diameter [mm]:
32
Entire Slot Depth [in]:
1.34
Entire Slot Depth [mm]:
34
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08021500
Item Name:
1-1/4 Break-Away D.Drill Swivel 1200 lb
Length [in]:
5.44
Length [mm]:
138
Obsolete Part Number:
CDX08021500
Package Type:
Each
Pin Center [in]:
.59
Pin Center [mm]:
15
Pin Diameter [in]:
.37
Pin Diameter [mm]:
9
Replacement Break Pin:
08021215
Replacement Part:
08081042, 1-1/4 Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Shipping Method:
Parcel
Slot Width [in]:
.56
Slot Width [mm]:
14
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
2.000000
