Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use "weak link" pipe sections or wire when using the 7/8" Condux Break-Away Swivel.
This swivel is available to accommodate various pulling needs.? Break loads range from 150 lbs. (667N) - 1,800 lbs (8,006N) and are designed to separate at ?10% of their rated break load.? Order replacement pins as needed.
Note: D. Drill Swivels come with a 90 day limited warranty.
*WARNING: This swivel is to be used while Directional Drilling only. Severe personal injury could result if used with rope or with steel winch lines in cable pulling operations.
Break Load [lb]:
850
Break Load [Newton]:
3781
Diameter [in]:
0.875
Diameter [mm]:
22
Entire Slot Depth [in]:
1.03
Entire Slot Depth [mm]:
26
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08021085
Item Name:
7/8 Break-Away Directional Drill Swivel 850 lbs.
Length [in]:
4.83
Length [mm]:
122
Package Type:
Each
Pin Center [in]:
.53
Pin Center [mm]:
13
Pin Diameter [in]:
.31
Pin Diameter [mm]:
8
Replacement Break Pin:
08018805
Replacement Part:
08081065, 7/8 Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Shipping Method:
Parcel
Slot Width [in]:
0.38
Slot Width [mm]:
9
Units Per Package:
1
Weight [lb]:
0.550000
