Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market.
All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.
Swivels are designed to pass through a sheave, but may not be pulled around a bullwheel or capstan.
Aerial Working Load [lb]:
1500
Aerial Working Load [Newton]:
6672
Diameter [in]:
0.875
Diameter [mm]:
22
Entire Slot Depth [in]:
1.06
Entire Slot Depth [mm]:
27
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08016000H
Item Name:
7/8 2500 lb. Hex Clevis Champion Pulling Swivel
Length [in]:
4.51
Length [mm]:
115
Package Type:
Each
Pin Center [in]:
.53
Pin Center [mm]:
13
Pin Diameter [in]:
.31
Pin Diameter [mm]:
8
Shipping Method:
Parcel
Slot Depth [in]:
0.375
Slot Depth [mm]:
10
Slot Width [in]:
0.38
Slot Width [mm]:
10
Underground Working Load [lb]:
2500
Underground Working Load [Newton]:
11120
Units Per Package:
1
Weight [lb]:
0.650000
