Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use "weak link" pipe sections or wire when using the Condux Break-Away Swivel. Six different diameter swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. (5,338 N) to 25,000 lbs. (111,250 N) and are designed to separate at ?10% of their rated break load. Order Replacement Pins as needed.
NOTE: D.Drill Swivels come with a 90 day limited warranty.
*WARNING: These swivels are to be used while Directional Drilling only.? Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.
Break Load [lb]:
10,000
Break Load [Newton]:
44480
Compatible Swivel Grease:
08190007, Directional Drilling Grease
Diameter [in]:
2
Diameter [mm]:
51
Entire Slot Depth [in]:
1.81
Entire Slot Depth [mm]:
46
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08029400
Item Name:
2 Break-Away Directional Drill Swivel 10000 lb
Length [in]:
7.83
Length [mm]:
199
Maximum Outside Diameter [in]:
2.89
Maximum Outside Diameter [mm]:
73
Package Type:
Each
Pin Center [in]:
.75
Pin Center [mm]:
19
Pin Diameter [in]:
.63
Pin Diameter [mm]:
16
Replacement Break Pin:
08029405
Replacement Part:
08190114, 2 Clevis Bolt for 819 D.Drill Swivel|02250600, Lock Nut for 2 819 D.Drill Clevis Bolt
Shipping Method:
Parcel
Slot Width [in]:
.75
Slot Width [mm]:
19
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
5.000000
